Instructions / Assembly

ASSEMBLE INSTRUCTIONS
8
Install Seat with Lid (C), (Fig. 8)
• First, turn the toilet seat with lid upside-down.
• Second, insert the lock-bolt (00) in the bolt trough, then
adjust the lock-bolt (00) to make the hole distance match
with the toilet.
• Third, put the anti-slip washer (RR) through the lock-bolt
(00) and press it into the bolt trough.
• Then turn the toilet seat with lid over, so lock-bolts (00)
protrude downward. Insert lock-bolts (00) into the toilet
holes and adjust the toilet seat and lid to find the best
assembly position.
• Finally, place the washer (PP) and then the lock-nut (QQ)
onto the lock-bolt (00) from underneath the toilet bowl (B)
and tighten the lock-nut (QQ) firmly.
CARE AND MAINTENANCE
Your new toilet is made of stain-, acid- and abrasion-resistant vitreous china. Clean the outside surface with mild soap,
warm water and a soft cloth. On stubborn stains use a powdered detergent and damp sponge or nylon scouring pad.
Never use abrasive scouring powders, cleansers or pads because they will scratch, damage and dull the surface.
WARNING: DO NOT USE IN-TANK CLEANERS. Products containing chlorine (calcium hypochlorite) can
seriously damage tank fittings potentially causing leaks, excessive water use and property damage. The manufacturer
shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium
hypochlorite).
When cleaning your toilet seat, wash it with mild soapy water. Rinse seat thoroughly with clean water and dry with a
soft cloth. Avoid detergents, disinfectants or cleaning products in aerosol cans. NEVER use abrasive scouring powders
on your seat. Some bathroom chemicals and cosmetics may cause damage to the seat's finish, so test your cleaning
solution on an inconspicuous area before applying to the entire surface.
Fig. 8