Operating instructions

Page 13

SECTION 4

ANTENNA CONFIGURATION

The King-Dome is factory pre-set for DIRECTV standard digital programming broadcast from the

101° W satellite.

If you also receive your local channels from DIRECTV’s 119 satellite or if you subscribe to Dish

Network or Bell TV programming, you must re-configure the antenna to work with your satellite

service. Doing this will allow the King-Dome to lock on the correct satellites to receive your

programming and also enable automatic satellite switching via the receiver’s remote control for

multi-satellite service.

Antenna configuration is a one time procedure that MUST BE COMPLETED

before using your

King-Dome antenna.

To configure your antenna, follow these steps:

1. SATELLITE SERVICE OPTIONS

Determine the service you want to program (pages 14-15).

2. ANTENNA CONFIGURATION

Configure the antenna for the service you chose in step 1.

You can use either:

A) the supplied wall mount controller (page 16).

B) keypad #1844 (page 23).

3. DISH AND BELL TV CHECK SWITCH PROCEDURE

For all Dish Network and Bell TV services:

Configure your receiver for mobile use by running a check switch (page 27).

#1844

Diagnostic Keypad