Operating instructions

BELL TV (May not be available in all areas due to service provider limitations.)
The Sea-King will automatically switch between the 82 and 91 satellites for Bell TV by using the
receiver’s remote control, after the receiver has been properly configured. Choose BEV 82/91 (see
page 20) and follow the instructions on pages 26-27.
Page 25
SECTION 6
AUTOMATIC SATELLITE SWITCHING
DISH Network - Bell TV
DISH 500 FOR DISH NETWORK
The Sea-King will automatically switch between the 110 and 119 satellites for DISH Network by
using the receiver’s remote control, after the receiver has been properly configured. Choose the
DISH 110/119 option (see page 20) and then follow the instructions on pages 26-27.
DISH 1000/1000a FOR DISH NETWORK HDTV
DISH Network HD programming is broadcast from 4 satellites (61.5,110,119,129). The 61.5 and 129
satellites broadcast identical programming. The 61.5 is generally stronger in the eastern U.S. and
the 129 in the western U.S. The map below shows the approximate coverage for each satellite.
Your Sea-King antenna can be easily configured to work with two different satellite trios (DISH
1000a: 61.5,110,119 or DISH 1000: 110,119,129). By choosing the appropriate trio that includes
either the 61.5 or the 129 satellite based on where you are, you can receive all of your desired
programming. Choose either DISH 1000 or DISH 1000a (see page 20) and then follow the
instructions on pages 26-27.
Note: This map is an
approximation only. Which trio
works best in a given location
may differ from what is indicated
on the map.