Manual

14
IMPORTANT: Always unplug the appliance before cleaning the MAGIC VAC
®
.
• Carefully wash your hands before proceeding to clean the appliance and its accessories.
• Both before and after use, clean the exposed surfaces of the MAGIC VAC
®
using a sponge moistened with a
mild, non-abrasive dishwashing detergent. If any liquids accidentally get inside the appliance, do not con-
nect it to the mains electricity supply and do not use it; contact your nearest dealer or authorised service
centre.
• The appliance is provided with a lower part (12) which is entirely removable and washable also on the dish-
washer top rack (fig. I1). Before washing the lower part, remove both gasket (9) (fig. I2) and sealing gasket
(10) (fig. I3). Clean both gaskets using a sponge moistened with a mild washing up liquid and leave them to
completely dry before positioning them again.
Once cleaning and drying are over, carefully fit both gaskets back in their places. Then reinsert the lower part
(12) in the port provided on the lid (4).
• Please refer to the instructions on the accessory pack.
INSTRUCTIONS FOR CLEANING
Voltage 230V~ 50Hz 140W
Dimensions 39 (L) x 12 (D) x 10 (H) cm
Weight 1.7 Kg
Marked
Disposal: In conformity with Directive 2012/19/EC, the symbol shown on the appliance to be disposed
of indicates that this is considered as waste and must therefore undergo “sorted waste collection”.
The user must therefore take (or have taken) the above waste to a pre-sorted waste collection centre
set up by the local authorities, or else give it back to the dealer when purchasing a new appliance of
the same type. Pre-sorted waste collection and the subsequent treatment, recovery and disposal operations
favour the production of appliances made of recycled materials and limit the negative effects of any incorrect
waste management on the environment and public health. The unlawful disposal of the product by the user
could result in administrative fines as provided by the laws transposing Directive 2012/19/EC of the European
member state in which the product is disposed of.
TECHNICAL SPECIFICATIONS
Bottle Cap will allow you to create a vacuum inside the bottle so as to slow down oxidisation and preserve the
freshness and flavour of its contents for a longer time.
- By means of the connection hose (15) connect the air inlet (6) of the appliance to the MAGIC VAC
®
Bottle Cap
(20) (fig. H). Press the Cap firmly into the bottle.
- Lock the lid (4) by pushing the LOCK buttons (7); the machine will carry out a vacuum packing cycle and turn
off automatically on its completion.
- Disconnect the hose from both the Bottle Cap and the appliance immediately.
- To open a bottle sealed with the MAGIC VAC
®
Bottle Cap, simply pull the cap out of the bottle. You will hear
the air rushing into the bottle.
10 Vacuum packing with the cap attachment in MAGIC VAC
®
Executive containers or in containers
sealed with MAGIC VAC
®
Universal Caps with the previous model of knob
To use the Cap Attachment in MAGIC VAC
®
Executive containers or in containers sealed with MAGIC VAC
®
Universal Caps with the previous model of knob, read the instructions supplied in our web page
www.magicvac.it.
If the LOCK buttons are not released automatically after the vacuum pack-
aging cycle, press with both hands on the sides of the cover, as shown in
the figure.
Packaging disposal
20
PAP
Product box
04
LDPE
Product packaging bag and bag packing
MAGIC Cutter
21
PAP
Cardboard insert for lid