SDS

SAFETY
DATA
SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Porcelain Chip Fix- 3007 Part A
Revision Date: 23-Apr-2015
Document No.: 130529-5 Page 3 of 5
Release Date: 1/10/2014
SECTION 7 – HANDLING AND STORAGE
Precautions for Safe Handling
Handling: Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapors/spray. Do not swallow. Handle
and open container with care. When using do not eat, drink or smoke.
General Hygiene Advice: Launder contaminated clothing before use. Wash hands before eating, drinking, or smoking.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Keep out of the reach of children. Keep container tightly closed.
Incompatible Materials: None known.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
Exposure Guidelines:
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Oxirane, 2,2’-[(1-methylethylidene) bis(4,1-
phenyleneoxymethylene)] bis-, homopolymer (25085-99-8)
Not available Not available Not available
Titanium dioxide (13463-67-7)
10 mg/m
3
15 mg/m
3
(total dust)
Not available
Xylenes (o-, m-, p- isomers) (1330-20-7)
100 ppm
435 mg/m
3
Not available
Ethylbenzene (100-41-4)
20 ppm
435 mg/m
3
Not available
Isobutyl alcohol (78-83-1)
50 ppm
300 mg/m
3
Not available
2-Phenoxyethanol (122-99-6)
Not available
Not available
Not available
Appropriate Engineering Controls
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure
limits.
Individual Protection Measures
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the
selected respirator.
Skin and Body Protection: Wear suitable protective clothing.
Eye/Face Protection: Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and
face protection (face shield).
General Work/Hygienic Practices: Handle in accordance with good industrial hygiene and safety practice.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: White liquid
Odor: Slight
Odor threshold: Not determined.
pH: Not determined
Melting point/freezing point: Not determined
Initial boiling point and boiling range: Not determined
Flash point: >100ºC (212ºF) TCC
Evaporation rate: Not determined
Flammability (solid, gas): Not flammable
Upper/lower flammability or explosive limits: Not determined
Vapor pressure: Not determined
Vapor density: Not determined