SDS

SAFETY DATA SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Porcelain Chip Fix- 3007 Part B
Revision Date: 27-Apr-2015
Document No.: 130529-5 Page 3 of 5
Release Date: 1/10/2014
SECTION 7 – HANDLING AND STORAGE
Handling: Keep away from sources of ignition- No smoking. Do not get in eyes, on skin, or clothing. Do not breathe
dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open container with care. Take precautionary measures
against static discharge. Use only non-sparking tools. When using do not eat, drink or smoke. Use only outdoors or in
well-ventilated area.
General Hygiene Advice: Launder contaminated clothing before use. Wash hands before eating, drinking, or smoking.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Proper grounding procedures to avoid static electricity should be followed. Keep out of the reach of
children. Keep container tightly closed and in well-ventilated place. Keep Cool.
Incompatible Materials: Oxidizers.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
Exposure Guidelines:
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Propylene glycol monomethyl ether (107-98-2)
50 ppm
Not available
Not available
Bisphenol A (80-05-7)
Not available
Not available
Not available
Diethylenetriamine (111-40-0)
1 ppm
Not available
Not available
Appropriate Engineering Controls
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure
limits.
Individual Protection Measures
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the
selected respirator.
Skin and Body Protection: Wear suitable protective clothing.
Eye/Face Protection: Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and
face protection (face shield).
General Work/Hygienic Practices: Handle in accordance with good industrial hygiene and safety practice.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear liquid
Odor: Mild
Odor threshold: Not determined.
pH: Not determined
Melting point/freezing point: Not determined
Initial boiling point and boiling range: Not determined
Flash point: 47.2ºC (117ºF) TCC
Evaporation rate: Not determined
Flammability (solid, gas): Flammable
Upper/lower flammability or explosive limits: Not determined
Vapor pressure: Not determined
Vapor density: Not determined
Relative density: 0.97
Solubility(ies): Not determined