MSDS

EYE EXPOSURE: If this product enters the eyes, open victim's eyes while under gently running water. Use sufficient force to open
eyelids. Have victim "roll" eyes.
Minimum flushing is for 15 minutes. Seek medical attention if irritation persists.
INHALATION: If vapors, mists, or sprays of this product are inhaled, remove victim to fresh air. Victim must seek immediate medical
attention if any adverse exposure symptoms develop. If necessary, use artificial respiration to support vital functions.
INGESTION: If this product is swallowed, DO NOT INDUCE VOMITING unless directed by medical personnel. Have victim rinse
mouth with water, if conscious. Never induce vomiting or give a diluent (e.g., water) to someone who is
unconscious, having
convulsions, or unable to swallow.
5. FIRE-FIGHTING MEASURES
FLASH POINT: >200
AUTOIGNITION TEMPERATURE: Not available.
FLAMMABLE LIMITS (in air by volume, %):
Lower: Not available.
Upper: Not available.
FIRE EXTINGUISHING MATERIALS: Use extinguishing material suitable to the surrounding fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS: When involved in a fire, this material may decompose generating dusts, irritating
fumes and toxic gases (e.g., Carbon monoxide, Carbon dioxide, oxides of Titanium and Calcium).
SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders should wear eye protection. Structural firefighters must wear
Self-Contained Breathing Apparatus and full protective equipment.
6. ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK RESPONSE: Absorb spilled liquid with suitable absorbent materials. Scoop up dried product. Dispose of in
accordance with applicable U.S. Federal, State, or local procedures and guidelines for handling nonhazardous waste.
7. HANDLING and STORAGE
WORK PRACTICES AND HYGIENE PRACTICES: Wash thoroughly after using this product. Do not eat or drink while using this
material. Avoid generating dusts, mists or sprays of this product. Remove contaminated clothing immediately.
STORAGE AND HANDLING PRACTICES: Store containers in a cool, dry location, away from direct sunlight, sources of intense heat,
or where freezing is possible. Store away from incompatible materials.
8. EXPOSURE CONTROLS - PERSONAL PROTECTION
RESPIRATORY PROTECTION: None needed under normal conditions of use
EYE PROTECTION: For consumer use, wearing eye protection is advisable. However, for specific industrial applications, enhanced
eye protection can be necessary.
BODY PROTECTION: For consumer use, no specific body protection is normally needed
9. PHYSICAL and CHEMICAL PROPERTIES
APPEARANCE, ODOR AND COLOR: This product is a white paste with slight ammonia odor.
SPECIFIC GRAVITY: 1.61 MELTING/FREEZING POINT: Not available.
SOLUBILITY IN WATER: Parital BOILING POINT: Not established.
VAPOR PRESSURE, mm Hg @ 20°C: Not established. pH: 8.0 – 9.0
ODOR THRESHOLD: Not available.
V.O.C. less water, less exempt: < 2% by Weight, < 20 g/L
10. STABILITY and REACTIVITY
STABILITY: Stable under normal circumstances of use and handling.
DECOMPOSITION PRODUCTS: Thermal decomposition of this product may generate dusts, irritating fumes, and toxic gases (e.g.,
Carbon monoxide and Carbon dioxide).
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product is not compatible with strong bases, strong acids, and
powerful oxidizers.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Avoid contact with incompatible chemicals.