MSDS

Page 4 of 14
respirator with auxiliary self-contained air supply is required under OSHA’s Respiratory Protection Standard (29 CFR
1910.134).
EYE PROTECTION: For consumer use, wearing eye protection (such as splash goggles) is advisable. However, for
specific industrial applications, enhanced eye protection can be necessary. Use approved safety goggles or safety
glasses, as described in OSHA 29 CFR 1910.133. If necessary, refer to U.S. OSHA 29 CFR 1910.133, or appropriate
Canadian standards.
HAND PROTECTION: For consumer use, wearing protective gloves is recommended. For specific industrial applications,
wear chemical impervious gloves (e.g., Neoprene or Nitrile). If necessary, refer to U.S. OSHA 29 CFR 1910.138 or the
appropriate standards of Canada.
BODY PROTECTION: For consumer use, no specific body protection is normally needed. For specific industrial
applications, body protection is not normally needed. Use body protection appropriate for task (e.g., Tyvek suit, rubber
apron). If a hazard of injury to the feet exists due to falling objects, rolling objects, where objects can pierce the soles of
the feet or where employee’s feet can be exposed to electrical hazards, use foot protection, as described in U.S. OSHA
29 CFR 1910.136.
HMIS PERSONAL PROTECTIVE EQUIPMENT RATING: Industrial Use situations: C; Safety glasses, gloves and body
protection.
9. PHYSICAL and CHEMICAL PROPERTIES
RELATIVE VAPOR DENSITY (air = 1): > 1 EVAPORATION RATE (BuAc =1): < 1
SPECIFIC GRAVITY: 1.38 MELTING/FREEZING POINT: Not available.
SOLUBILITY IN WATER: Negligible. BOILING POINT: Not available.
VAPOR PRESSURE: 62.3 psig (Dimethyl ether) pH: Not applicable.
ODOR THRESHOLD: Not available.
COEFFICIENT OF OIL/WATER DISTRIBUTION (PARTITION COEFFICIENT): Not available.
V.O.C. mixed: Less than 65 %. M.I.R. mixed: Less than 1.4.
APPEARANCE, ODOR AND COLOR: This product is a white aerosol with a hydrocarbon odor.
HOW TO DETECT THIS SUBSTANCE (warning properties): The appearance and odor of this product can act as
warning properties in the event of an accidental release.
10. STABILITY and REACTIVITY
STABILITY: Stable under normal circumstances of use and handling.
DECOMPOSITION PRODUCTS: Thermal decomposition of this product can generate dusts, irritating fumes, and toxic
gases (e.g., Carbon monoxide, Carbon dioxide, and oxides of Nitrogen).
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product is not compatible with strong bases, strong
acids, and powerful oxidizers.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Avoid contact with incompatible chemicals. Avoid using product in a confined space.
11. TOXICOLOGICAL INFORMATION
TOXICITY DATA: There are currently no toxicity data available for this product; the following toxicology information is
available for components greater than 1% in concentration.
The following data are available for Polyamide resin:
Rat - oral, LD
50
: 4340 mg/kg
Rabbit - skin absorption, LD
50
: 800 mg/kg
The following data are available for 1-Methoxy-2-propanol:
Skin-Rabbit, adult 500 mg open Mild irritation effects
Eye effects-Rabbit, adult 230 mg Mild irritation effects
Inhalation-Rat TCLo:3000 ppm/6H (6-15D preg):Teratogenic effects
Inhalation-Human TCLo:3000 ppm: NOSE, Central nervous system effects ,Gastrointestinal tract effects
Oral-Rat LD
50
:5660 mg/kg
Inhalation-Rat LCLo:7000 ppm/4H
Intraperitoneal-Rat LD
50
:3720 mg/kg
Subcutaneous-Rat LD
50
:7800 mg/kg
Intravenous-Rat LD
50
:4200 mg/kg
Oral-Mouse LD
50
:11,700 mg/kg
Intravenous-Mouse LD
50
:5300 mg/kg
The following data are available for 2-Butoxyethanol:
Skin-Rabbit, adult 500 mg open Mild irritation effects
Inhalation-Rat TCLo:200 ppm/6H (female 6-15D post):Reproductive effects
Inhalation-Rabbit, adult TCLo:100 ppm/6H (female 6-18D post):Teratogenic effects
Oral-Woman TDLo:600 mg/kg