SDS

SAFETY DATA SHEET
Confirms to OSHA Hazard Communication Standard (CFR 29 1910.1200) HazCom 2012
Product:
Tub and Tile Refinishing Kit- Base- 3124
Revision Date: 27-Sep-2018
Document No.: 130529-5 Page 3 of 5
Release Date: 1/10/2014
Contain and/or absorb spill with inert material (e.g. sand, vermiculite), then place in a suitable container. Do not flush to
sewer or allow to enter waterways. Use appropriate Personal Protective Equipment (PPE). Scoop up material and place
in a disposal container. Provide ventilation.
SECTION 7 – HANDLING AND STORAGE
Precautions for Safe Handling
Handling: Keep away from sources of ignition- No smoking. Do not get in eyes, on skin, or on clothing. Do not breathe
dust/fume/gas/mist/vapors/spray. Do not swallow. Handle and open container with care. Take precautionary measures
against static discharge. Use only outdoors or in well-ventilated area.
General Hygiene Advice: Launder contaminated clothing before use. Wash hands before eating, drinking, or smoking.
Conditions for Safe Storage, Including any Incompatibilities
Storage Conditions: Keep out of the reach of children. Keep container tightly closed. Store in a dry, cool and well-
ventilated area. Keep away from heat, sparks, and flame. Store locked up.
Incompatible Materials: Strong acids, strong bases.
SECTION 8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
Exposure Guidelines:
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Titanium dioxide (13463-67-7)
10 mg/m
3
15 mg/m
3
Not available
Benzene, 1-chlror-4-(trifluoromethyl)- (98-56-6)
Not available
Not available
Not available
Fatty acids, C18-unsaturated, dimers, polymers with tail-oil
fatty acids and triethylenetetramine (68082-29-1)
Not available
Not available
Not available
2-Butoxyethanol (111-76-2)
20 ppm
240 mg/m
3
5 ppm
Dipropylene glycol monomethyl ether (34590-94-8)
100 ppm
100 ppm
100 ppm
Solvent naphtha, petroleum light aromatic (64742-95-6)
Not available
Not available
Not available
Appropriate Engineering Controls
Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below recommended exposure
limits.
Individual Protection Measures
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the
selected respirator.
Skin and Body Protection: Wear suitable protective clothing.
Eye/Face Protection: Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles) and
face protection (face shield).
General Work/Hygienic Practices: Handle in accordance with good industrial hygiene and safety practice.
SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Liquid dispersion
Odor: Organic solvent
Odor threshold: Not determined.
pH: Not determined
Melting point/freezing point: Not determined
Initial boiling point and boiling range: Not determined
Flash point: 40ºC (104ºF) TCC
Evaporation rate: Not determined