Installation Instructions

Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x 2) #8 x 2” screws (B)
• (x 2) wall anchors - if the cabinet will not be screwed to wall
studs (C)
Estimated installation time: 1/2 hour
PREPARATIONPACKAGE CONTENTS
STRATTON LINEN CABINET
INSTALLATION INSTRUCTIONS
Models: 30155, 30046
Model: 30155
18”W x 60”H x 19-1/8”D
Model: 30046
18”W x 60”H x 22-1/6”D
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precautionary
measures to ensure a secure grip on the cabinet when lifting.
CAUTION:
The bathroom wall and oor must be nished prior to installation of
the cabinet.
INSTALLATION Model 30046 shown in illustration
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing
the cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet
immediately with a clean, soft and dry cloth.
Figure 1
Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
or e-mail: [e-mail].
1: Using a level, locate any uneven oor and / or wall areas
where the linen cabinet will be installed. Unevenness can cause
the linen cabinet to become misaligned resulting in twisting of
the cabinet. Repair any uneven areas by reducing high spots or
shimming low spots.
2: 1) Place the linen cabinet in the desired position. 2) Ensure
the linen cabinet is level front to back and conrm at both
sides. Also ensure that the linen cabinet is level side to side,
conrming at both the front and back rail.
3: Secure the linen cabinet to the wall by inserting (x 2)
#8 x 2 in. screws (B - not included) through the back rail of
the linen cabinet. Figure 1. NOTE: It is recommended that the
cabinet be installed to at least 1 wall stud. In order to locate wall
studs, you can use a stud nder or tap along the wall until you
nd a spot that sounds solid. If you are unable to locate a wall
stud, it is recommended that you use wall anchors
(C - not included) to secure your cabinet.
4: Attach the hardware (sold separately) as per the instructions
provided with the hardware.
Cabinet (x 1)