Installation Instructions

Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x2) #8 x 2” screws (B)
• (x2) wall anchors - if the cabinet will not be screwed to wall
studs (C)
Estimated installation time: 1/2 hour
PREPARATIONPACKAGE CONTENTS
GENEVA LINEN CABINET
INSTALLATION INSTRUCTIONS
White model: 30241
Gray model: 30249
White model: 30241
15”W x 64”H x 21-3/4”D
Gray model: 30249
15”W x 64”H x 21-3/4”D
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precautionary
measures to ensure a secure grip on the cabinet when lifting.
CAUTION:
The bathroom wall and oor must be nished prior to installation of
the cabinet.
INSTALLATION
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing
the cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet
immediately with a clean, soft and dry cloth.
Figure 1
Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., CST,
Monday - Friday or e-mail: [e-mail].
1: Using a level, locate any uneven oor and / or wall areas
where the linen cabinet will be installed. Unevenness can
cause the linen cabinet to become misaligned resulting in
twisting of the cabinet. Repair any uneven areas by reducing
high spots or shimming low spots.
2: 1) Place the linen cabinet in the desired position. 2) Ensure
the linen cabinet is level front to back and conrm at both
sides. Also ensure that the linen cabinet is level side to side,
conrming at both the front and back rail.
3: Secure the linen cabinet to the wall by inserting (x2) #8 x 2 in.
screws (B - not included) through the back rail of the linen
cabinet. Figure 1. NOTE: It is recommended that the cabinet
be installed to at least 1 wall stud. In order to locate wall
studs, you can use a stud nder or tap along the wall until
you nd a spot that sounds solid. If you are unable to locate a
wall stud, it is recommended that you use wall anchors
(C - not included) to secure your cabinet.
Cabinet (x1)
Figure 2: installed