Installation Instructions

Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
or e-mail: [e-mail].
PACKAGE CONTENTS
BELLEWOOD MEDICINE CABINET
INSTALLATION INSTRUCTIONS
Model: 49771
Cabinet (x 1)
36”W x 35-1/2”H x 5-1/4”D
Shelf support
(x 24)
Washer
(x 4)
2” screw
(x 4)
Adjustable shelf
(x 3)
Adjustable shelf
(x 3)
PREPARATION
Tools required for assembly (not included):
• tape measure
• electric drill with #2 drill bit (A)
• level
• (x 4) wall anchors - if the cabinet will not be
screwed to wall studs (B)
• Note: Recommended Bulb Specication: screw-in
sockets E26 and use 60w-G25 bulb.
Estimated installation time: 1/2 hour
B
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra precautionary
measures to ensure a secure grip on the cabinet when lifting.
CAUTION:
The bathroom wall must be nished prior to installation of the
cabinet.
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing
the cabinet in direct sunlight.
• Avoid exposing the cabinet to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the cabinet
immediately with a clean, soft and dry cloth.
• Do not use strong detergents or abrasive cleaners as
they may damage the surface of this product.
Figure 1
B
INSTALLATION
1: Using a level, locate any uneven wall areas where the cabinet will be installed.
Unevenness can cause the cabinet to become misaligned resulting in twisting of
the cabinet. Repair any uneven areas.
2:
Determine the desired location of the cabinet. It is recommended that the
cabinet be installed to at least 1 wall stud. In order to locate wall studs, you
can use a stud nder or tap along the wall until you nd a spot that sounds
solid. If you are unable to locate a wall stud, it is recommended that you use
wall anchors (B - not included) to secure your cabinet.
3:
Secure the cabinet to the wall by inserting (x 4) 2” screws with (x 4) washers
through the backrails of the cabinet and into the wall. Figure1.
4:
Insert each shelf support (x 24) into the pre-drilled holes in the cabinet then
insert each shelf (x 6). Figure 2.
5: Attach the lights (sold separately) as per the instructions provided with the lights.
Note: Wiring Instructions:
This medicine cabinet requires hardwired installation: please ensure to use an
authorized electrician for wiring consultation and installation.