Installation Instructions

PACKAGE CONTENTS
Vanity top, hardware, faucet and drain not included.
SONATA VANITY BASE
INSTALLATION INSTRUCTIONS
Rustic pine models: 30278, 30279, 30280
Graphite gray models: 30290, 30291, 30292
Matte white models: 30284, 30285, 30286
Questions? Call our customer service department at
1-855-995-5578, 8:30 a.m. - 5 p.m., CST, Monday - Friday
or e-mail: contactus@magickwoods.com.
Base (x 1) Base (x 1) Base (x 1)
Tools required for assembly (not included):
tape measure
electric drill with #2 drill bit (A)
level
(x 2) #8 x 2” screws (B)
(x 2) wall anchors - if the vanity will not be screwed to wall studs (C)
Estimated installation time: 2-1/2 hours (including removal of old vanity if applicable)
PREPARATION
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra
precautionary measures to ensure a secure grip on the vanity
base when lifting.
CAUTION:
installation of the vanity base.
CARE & MAINTENANCE
the vanity in direct sunlight.
Avoid exposing the vanity to extreme temperatures by
installing away from heat and air vents.
Dust frequently with a clean, soft and dry cloth.
Wipe away any water or liquid spills on the vanity base
immediately with a clean, soft and dry cloth.
1:
faucet. 3) Remove the old vanity top and vanity. Note:
drain pipe.
INSTALLATION Model 30279 shown in illustration
Rustic pine model: 30278
Graphite gray model: 30290
Matte white model: 30284
22-1/4”W x 29”H x 17-1/2”D
Rustic pine model: 30279
Graphite gray model: 30291
Matte white model: 30285
30-1/4”W x 29”H x 17-1/2”D
Rustic pine model: 30280
Graphite gray model: 30292
Matte white model: 30286
38-1/4”W x 29”H x 17-1/2”D

Summary of content (4 pages)