Installation Instructions

PACKAGE CONTENTS
Faucet and drain not included.
WINDSOR VANITY BASE AND TOP
INSTALLATION INSTRUCTIONS
Matte white models: 30312, 30313, 30314
Graphite gray models: 30319, 30320, 30321
Questions? Call our customer service department at
1-855-995-5578, 8:30 a.m. - 5 p.m., CST, Monday - Friday
or e-mail: [e-mail].
Base (x 1)
Base (x 1)
Knobs (x 2)
Knobs (x 7)
Knobs (x 8)
1” screws (x 2)
1” screw for
door (x 1)
1” screws for
doors (x 2)
13/16” screws for
drawers (x 6)
13/16” screws for
drawers (x 6)
Bumpers (x 4)
Bumpers (x 4) Bumpers (x 4)
Sink (x 1)
Sink (x 1) Sink (x 1)
Base (x 1)
PREPARATION
Matte white model
- 30312
Graphite gray model - 30319
26”W x 33-7/8”H x 17-3/4”D
Matte white model
- 30313
Graphite gray model - 30320
34”W x 33-1/2”H x 18-7/8”D
Matte white model
- 30314
Graphite gray model - 30321
41-1/2”W x 33-1/2”H x 19-7/8”D
WARNINGS & CAUTIONS
WARNING:
Two people are required for safe installation. Take extra
precautionary measures to ensure a secure grip on the vanity
base and top when lifting.
CAUTION:
• The bathroom oor and wall must be nished prior to
installation of the vanity base and top.
• Do not use water that exceeds temperatures of 140°F/46°C.
• Do not place any sharp or abrasive objects on the bare
surface of the vanity top.
CARE & MAINTENANCE
• To maintain the beauty of the furniture nish, avoid placing
the vanity in direct sunlight.
• Avoid exposing the vanity to extreme temperatures by
installing away from heat and air vents.
• Dust frequently with a clean, soft and dry cloth.
• Wipe away any water or liquid spills on the vanity base
immediately with a clean, soft and dry cloth.
• Clean the vanity top only with non-abrasive cleaners or
mild detergents - do not use powder cleansers.
For extremely stubborn stains, use a small amount of
acetone on a cloth and gently rub out the stain.
B
C
D
E
Tools required for assembly (not included):
• pliers (A)
• tape measure
• electric drill with #2 drill bit (B)
• level
• (x2) #8 x 2” screws (C)
• (x2) wall anchors - if the vanity will not be screwed to wall studs (D)
• Silicone (optional) (E)
Estimated installation time: 2-1/2 hours (including removal
of old vanity if applicable)
A