Installation Instructions

Step 2: Follow the detailed instructions
provided with the pop-up (sold separately)
to complete the vessel sink installation.
Note: The pop-up mounting ring must
be installed between the vessel sink
and the counter top. Figure 2. Failing
to install the mounting ring may result
in leakage through the bowl or
cracking/shattering the bowl.
Pop-up
Vessel sink
Mounting
ring
Rubber washer
Lock nut
CARE & MAINTENANCE
Pop-up (sold separately)
Figure 2
Vessel sinks are the ultimate in bathroom luxury and are offered in a variety of models at
www.magickwoods.com. Vessel sinks are extremely durable and can withstand a temperature
change of 68
O
F/20
O
C without breaking. CAUTION: do not use water that exceeds a temperature of
140
O
F/46
O
C.
Though resistant to breakage, vessel sinks can break or chip when a heavy object falls in or on them.
Please ensure that these installation instructions are followed to minimize breakage. Be especially
careful to use a caulk bead above and under the mounting ring to reduce vibration against the sink.
CAUTION: over-tightening or under-tightening the drain nuts may cause a poor installation, resulting
in the vessel sink breaking. Counter tops that are not level and plumb may also contribute to an
improper installation and may damage the vessel sink. Routinely check your vessel sink for any
cracks or chips: small chips could localize these stresses and immediately weaken or break the glass.
To avoid scratches, do not clean the vessel sink with strong detergents, acids, abrasives or harsh
cleaners. Use a mild soap with a soft cloth to clean your vessel sink.