Installation Instructions

Thank you for selecting our product. To ensure that your installation goes smoothly, please read these
instructions carefully and review the recommended materials/tools before you begin.
• Verify that your vessel sink is free from defects. If damaged, please contact our Customer Service
department.
• Observe all local plumbing codes and building codes.
• Additional  oor and wall preparation may be required to avoid damaging the product.
RECOMMENDED TOOLS AND MATERIALS FOR ASSEMBLY (not included)
Questions, problems, missing parts? Before returning to your retailer, call our Customer Service
department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday. [e-mail]
INSTALLATION
Step 1: 1. Position the mounting
ring, washer and glass vessel
sink as shown (mounting ring
and washer sold separately).
2. Apply a silicone caulk
bead both above and
underneath the mounting
ring to reduce vibration.
Figure 1.
• Dimensions for drain-out hole:
1-3/4 in.
• Dimensions for faucet hole:
1-1/4 in. min.
1-3/8 in. max.
Figure 1
Caulking or putty Putty knife Adjustable slip
lock nut wrench
Pop-up
(without over- ow)
Vessel
mounting ring
Washer
Mounting
ring
Silicone
caulk bead
Customer Service: 1-855-995-5578
Fax: [phone]
VESSEL SINK
INSTALLATION INSTRUCTIONS
MODEL 48499
Vessel