Installation Instructions

Thank you for selecting our product. To ensure that your installation goes smoothly, please read these instructions carefully and review the
recommended tools and materials before you begin.
• Verify that your vessel sink is free from defects. If damaged, please contact our Customer Service department.
• Observe all local plumbing codes and building codes.
 •Additionaloorandwallpreparationmayberequiredtoavoiddamagingtheproduct.
RECOMMENDED TOOLS & MATERIALS FOR ASSEMBLY (not included)
INSTALLATION
1: 1) Position the mounting ring, washer and glass vessel sink as shown (mounting ring and washer sold separately). 2. Apply a silicone
caulk bead both above and underneath the mounting ring to reduce vibration. Figure 1.
• Dimensions for drain-out hole: 1-3/4”.
• Dimensions for faucet hole: 1-1/4” min., 1-3/8” max.
2: Follow the detailed instructions provided with the pop-up (sold separately) to complete the vessel sink installation. Note: The pop-up
mounting ring must be installed between the vessel sink and the countertop. Figure 2. Failing to install the mounting ring may result in
leakage through the bowl or cracking/shattering the bowl.
Washer
Mounting
ring
Figure 1
Silicone
caulk bead
Caulking or putty Putty knife
Adjustable slip lock
nut wrench
Pop-up
(withoutover-ow)
Vessel
mounting ring
GLASS VESSEL SINK
MODELS 48479 & 49177
.
INSTALLATION INSTRUCTIONS
Vessel
Questions? Call our customer service department at 1-855-995-5578, 8:30 a.m. - 5 p.m., EST, Monday - Friday
or email [e-mail].
Pop-up
Vessel sink
Mounting
ring
Rubber washer
Lock nut
Pop-up
(sold separately)
Figure 2
Figure 3: Installed (side view)