Magigoo Pro 3D Printing Adhesive for Polycarbonate Technical Data Sheet* Ver 1.0 October 2018 *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary. magigoo.
Description: MAGIGOO® - Polycarbonate, is an all-in-one 3D printing adhesive that offers sure adhesion with easy release for polycarbonate based filaments. Magigoo Polycarbonate, has been specifically formulated for polycarbonate filaments to ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D printers. Warping, among other factors, is caused by the differential cooling of a print during the 3D printing process, especially on higher temperature filaments such as polycarbonate.
To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardised calibration prints. An additional benefit of MAGIGOO® - Polycarbonate, being thermally activated, is that it will release the print upon cooling.
Application Method: Step 1: Shake the bottle vigorously. Step 2: Press nib against the surface. * * NB! The Magigoo – Polycarbonate container is spring activated. Pressing the Spring activated valve inside bottle without pressing the nib against the bed may result in applicator popping off and product wastage. Step 3: Apply to Desired area * Step 4: Print * NB! Ensure proper bed calibration. Having nozzle too close to bed surface may cause excess adhesion damaging the bed.
Package formats: General Desktop Bottle 50 mL – Foam head applicator with an HDPE actuator valve house in a HDPE system. Bottle is an HDPE/LDPE Blend allowing for the user to control the flow. MAGIGOO Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate Paola, PLA3000, Malta info@magigoo.com www.magigoo.
