Data Sheet

!
Description:
MAGIGOO® - Polycarbonate, is an all-in-one 3D printing adhesive that offers sure
adhesion with easy release for polycarbonate based filaments. Magigoo
Polycarbonate, has been specifically formulated for polycarbonate filaments to
ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D
printers. Warping, among other factors, is caused by the differential cooling of a print
during the 3D printing process, especially on higher temperature filaments such as
polycarbonate. A heated bed could help reduce warping but for printing repeatability
and reliability and sure adhesion, MAGIGOO® - Polycarbonate is needed.
Technical specifications:
‣
Appearance: clear-faint yellow liquid
‣
Consistency: low viscosity
‣
Solvent: water
‣
Decomposition: Extended periods exceeding >= 130 °C
Properties:
MAGIGOO® - Polycarbonate, acts as a thermally activated interfacial layer,
allowing for better interactions, both at the micro and molecular level,
between the printing bed and the printing materials. It is generally
recommended to print according to the printing temperatures recommended
by the filament supplier. The printing conditions vary between one printer and
another.
Intended use:
To be used on FDM/FFF 3D printers with a heated bed on aluminium, glass surfaces.
Also works when applied on sheets e.g. Kapton, PEI and similar. To be used with
Polycarbonate plastics only.
2
[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
1