Magigoo Pro 3D Printing Adhesive for Glass Filled Polypropylene Technical Data Sheet* Ver 1.0 November 2018 *This document has been conscribed to the best of our knowledge. Verifications should be made to confirm details when necessary. magigoo.
Description: MAGIGOO® - Glass filled Polypropylene (Magigoo-PPGF), is an all-in-one 3D printing adhesive that offers sure adhesion with easy release for Glass filled Polypropylene based filaments. Magigoo-PPGF, has been specifically formulated for Glass filled Polypropylene filaments to ensure that it provides an easy to use solution to reduce warping in FDM/FFF 3D printers. Warping, among other factors, is caused by the differential cool of a print during a 3D printing process.
An additional benefit of Magigoo-PPGF, being thermally activated, is that it will release the print upon cooling. Again, different printers, print surfaces or filaments will have slightly different release conditions but as a general rule a reduction in temperature of 30-40 °C will be sufficient to remove your prints without any effort. Cleaning and re-applying between prints is recommended especially on longer and/or more challenging prints.
Application Method: Step 1: Shake the bottle vigorously. * Step 2: Press nib against the surface. NB! The Magigoo – PPGF container is spring activated. Pressing the bottle * Spring activated valve inside without pressing the nib against the bed may result in applicator popping off and product wastage. Press to get adhesive flow Step 3: Apply to Desired area * Step 4: Print * NB! After print, wait until the build plate is cool to remove prints easily.
Package formats: General Desktop Bottle 50 mL – Foam head applicator with an HDPE actuator valve house in a HDPE system. Bottle is an HDPE/LDPE Blend allowing for the user to control the flow. MAGIGOO Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate Paola, PLA3000, Malta info@magigoo.com www.magigoo.
