Data Sheet

[e-mail]
www.magigoo.com
MAGIGOO
Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate
Paola, PLA3000, Malta
Description:
MAGIGOO® - Glass filled Polypropylene (Magigoo-PPGF), is an all-in-one 3D printing
adhesive that offers sure adhesion with easy release for Glass filled Polypropylene
based filaments. Magigoo-PPGF, has been specifically formulated for Glass filled
Polypropylene filaments to ensure that it provides an easy to use solution to reduce
warping in FDM/FFF 3D printers. Warping, among other factors, is caused by the
differential cool of a print during a 3D printing process. A heated bed could help
reduce warping but for printing repeatability and reliability Magigoo_PPGF is needed.
Technical specifications:
‣
Appearance: clear-faint yellow liquid
‣
Consistency: low-med viscosity
‣
Solvent: water
‣
Decomposition: extended periods exceeding >=130 °C
Properties:
Magigoo-PPGF acts as a thermally activated interfacial layer, allowing for
better interactions, both at the micro and molecular level, between the
printing bed and the printing materials. It is generally recommended to print
according to the printing temperatures recommended by the filament
supplier. The printing conditions vary between one printer and another.
To find the best temperature one could start from the lower end of the
recommended settings and increase the bed temperature in 5 °C increments.
This should be done with standardised calibration prints.
Intended use:
To be used on FDM/FFF 3D printers with a heated bed on glass surfaces. Also works
when applied on sheets e.g. Kapton, PEI and similar. To be used with Glass filled
Polypropylene plastics.
1