Operation Manual

5.3. Switching on the camera

To switch on the video camera press the On/O button for 2 seconds,

releasing the button as soon as the blue control LED lights up. The camera

then vibrates for a little while and switches to the Standby mode. The time it

takes for the camera to enter the Standby mode depends on the size of the

memory card.

5.4. Switch-o and automatic switch-o function

To switch o the video camera press the On/O button . The blue light

ashes three times before it is switched o. You can now release the button.

The camera vibrates twice and is switched o.

The camera switches o automatically once the memory card is full (and

loop recording has nished), the battery is empty, the AV cable has been

removed or the camera has not been used for 3 minutes. The red and blue

lights alternate when the camera switches o.

Note:

• ThebluecontrolLEDashesifthecameraisswitchedonwithoutan

inserted memory card. Switch camera o again and insert memory card.