Operation Manual

Setting the Date and TimeSetting the Date and Time

Setting the Date and Time

The Date/Time screen will be presented if/when:

The camera is turned on for the first time.

The camera is turned on after removing the batteries/AC power adapter for a long period of time or

replacing the batteries.

When the date and time setting screen appears, follow these steps to set the correct date and time.

You may also skip this procedure by selecting EXIT option and press the button

1. Select the “DATE” or “TIME” option by using the / button and

press the button.

2. Select the item’s field by using the / button and adjust the value

for the date and time by using the / button.

The date default setting is set in the order day-month-year.

3. After confirming all settings are correct, press the button.

4. Select the “MODE” option by using the / button and press the

button.

5. Select the “MODE” type by using the / button and press the button.

6. Select “EXIT” by using the / button and press the button.

The setting will be stored and the screen will return to the capture mode.

Attaching the Camera StrapAttaching the Camera Strap

Attaching the Camera Strap

To prevent accidental slippage during the use, always use the camera strap.

Attach the camera strap as follows:

1. Thread the small loop of the strap through the strap eyelet on the camera.

2. Pull the large loop through the small loop until the strap is firmly

secured.