Operation Manual

Start
16
Installation of camera
The camera must be mounted to the rear end of your vehicle�
The mount is designed to be fixed with the screws of your
license plate� However the camera can also be mounted in a
different position with two screws�
Mount the camera to a position which will ensure a clear view
behind you� Furthermore please ensure a secure cable route
as well�
Screw the base of the mount to the surface with the supplied
screws� Bear in mind that the “UP” marked side of the camera
is pointing upwards� Now install the cables to the designated
position�
Professional installation is recommended�
Install at your own risk�
Remove license plate screws
Attach camera with license plate screws