Operation Manual

13
If the automatic channel changing function has
been activated, the receiver changes reception
channels at regular intervals so that alternating
images of all connected cameras are shown on
screen. Using the TIME SELECT (O) slide switch at
the back of the receiver, channel changing intervals
can be set. Available intervals are 5, 10, 20 and 30
seconds.
5.3. Infrared light
The surveillance camera automatically adjusts to surrounding light conditions. An integrated
brightness sensor activates the infrared LED during dusk or darkness, which illuminates an area
of 18 m in front of the camera. Images can thus also be transmitted in dark conditions.
5.4. Positioning of surveillance camera
Once images are transmitted, the surveillance
camera can be positioned as required. Slightly
loosen the two wing nuts (N) on the stand.
Maintaining some tension facilitates alignment,
as the camera is still being held in place. You can
now move the surveillance camera in nearly all
directions until the best possible position has been
found.
Once positioned correctly, retighten wing nuts on
stand.
(O)
(N)
Note:
• Have a second person at the display unit help you with the positioning.