18.0

44 Track window and constant control elements
www.magix.com
Zoom settings
Command Keyboard shortcut Description
Play/Position marker Commands for quickly
editing the playback position
Marker left Alt + right
Marker right Alt + left
The play marker can be
moved quickly between the
markers.
Object border left Shift + Alt + right
Object edge right Shift + Alt + left
The play marker can be
quickly moved from object
edge (object start and end) to
object edge.
Zoom ranges
Show all A The entire project is visible.
Zoom 1s 1
Zoom 10 s 0
Zoom 60 s 6
Zoom 4 min 4
Zoom 10 min Shift + 0
The visible section of the
project is quickly set to the
selected value.
Vertical zoom
Zoom into waveform Ctrl + Cursor down
Zoom out of waveform Ctrl + Cursor up
Vertically zooms in and out of
the wave shape. This is useful
for locating the crossover
point (for precise sample
editing).
Volume controller/auto button
This controller sets the playback level of the track. Before exporting, the
project should be set as loud as possible in order to receive an optimally
calibrated recording level. The "Auto" button below the volume control is for
automatically optimizing the volume (normalizing).
In order to set the volume of the project as high as possible, place the position
line just before the loudest part of the project and start playback (the loudest
position can be found by locating the highest peak of the wave shape display).
After you have played the loudest part, click on the "Auto" button below the
master volume control. MAGIX Audio Cleaning Lab MX automatically adjusts
the volume so that the loudest part of the range that was just played is exactly
0 dB, i.e. the maximum volume.