1.0

16 Track Window and Transport Controls
point onward each time you press the CUE button and stop when you release
it. If the track is playing, it will jump to the cue point when the CUE button is
pressed and then pause. Cue markers are overwritten by new ones if the
track is manually repositioned while stopped (as per 'Cueing a track'
procedure above). Each of the 4 numbered buttons to the right of theCUE
button corresponds to 4 separate cue positions.
• Quick jump - Left-click on the Track Overview window (this displays the
whole track) to jump the song to the point selected.
• A (Auto-gain button) - Above the 'Deck gain' slider, activates the auto-gain
control engine. This balances the perceived loudness of tracks.
• Deck gain - Extra gain trim control. Click and drag vertically.
• Play position - The red vertical line at the middle of the Waveform window
represents the play-head/stylus position.
Lower Controls
• Play - Left-click to start the song playing. Right-click to start in sync with the
other deck.
Note: When Automix ("Playlist") is selected, the Play button for the active deck
is disabled.
• Load - To the right of the Play button is the quick-load button, which will
open a file browser and dump the selected track into the deck.
• LOOP (Loop and continue) - Loops a section of the song when clicked.
Select the loop length using the arrows immediately to the right of the LEAP
button. On release, the song will continue playing from the end of the loop.
NOTE: The length indicator (right) can be clicked so that loops/leaps are
synced to the nearest beat/bar. The beat-shift arrows mayb be used to
position loops.
• LEAP (Leap after loop) - Loops a section of the song when clicked. Select
the loop length using the arrows immediately to the right of the LEAP button.
On release, the song will resume from the point it would have reached if
looping had not occurred. Keep an eye on the playback marker in the Track
Window and you will notice the leap position is shown as a dashed line
moving forward while the LEAP loop plays.
NOTE: The length indicator (right) can be clicked so that loops/leaps are
synced to the nearest beat/bar.
• Length Indicator & Length Arrows - To the right of the LOOP/LEAP buttons
there are three controls. The length indicator (right) can be clicked so that