2.0

Track Window and Transport Controls 19
Note: A cue marker cannot be moved as such, instead you have to place it
afresh. This only works when stopped, during playback it will skip to the saved
position.
Deck-Gain
On the inside of the waveform display of the corresponding deck you will find
the gain control for the individual track. There are two options here:
 Track Gain - The level of individual tracks can be corrected using the extra
manual gain trim control. Click and drag vertically.
 A (Auto-gain button) - The button above the 'Deck gain' slider, activates the
auto-gain control engine. This automatically adjusts the track level in such a
way that the perceived track volume is consistently loud. If Auto gain is
activated, manual gain control is hidden.
Lower Controls
 Play - Left-click to start the song playing. Right-click to start in sync with the
other deck.
Note: When Automix (view page 32) is selected, the Play button for the active
deck is disabled.
 CUE Stops the deck and skips the selected cue position to (1..4), see
Cue-Marker (view page 18)
 Load -
To the right of the Play button is the quick-load button, which will
open a file browser and dump the selected track into the deck.
 LOOP (Loop and continue) - Loops a section of the song when clicked.
Select the loop length using the arrows immediately to the right of the LEAP
button. On release, the song will continue playing from the end of the loop.
 LEAP (Leap after loop) - Loops a section of the song when clicked. Select
the loop length using the arrows immediately to the right of the LEAP button.
On release, the song will resume from the point it would have reached if
looping had not occurred. Keep an eye on the playback marker in the Track
Window and you will notice the leap position is shown as a dashed line
moving forward while the LEAP loop plays.
 Length Indicator & +/- buttons - To the right of the LOOP/LEAP buttons
there are three buttons. The length indicator (above) can be clicked so that
loops/leaps are synced to the nearest beat/bar. Loops/Leaps can be
lengthened or shortened using the +/- buttons.
 Pitch Slider - Move the slider to change the speed of the song (down is faster
and up slower). The range can be adjusted on the General Settings page