2.0

22 Track Window and Transport Controls
 Fine beat-phase - A bar will grow toward the leading deck. No bar = perfect
phase.
 <- & -> - Auto-XFade start buttons.
 A & B - Transform deck A and B. Depending on the current state of the
X-Fader the switches will Punch / LMB (left-click) a faded/muted track or Cut
/ RMB (right-click) a playing track. The transformation is immediate.
 X-Fade - Master cross-fader control.
Beat-phase display
Beat-phase - Above the main X-fader is a set of 4 LEDs. The LEDs blink on to
show beat currently playing in each deck. Deck A upper Deck B lower. The
down-beat is indicated below (1st LED as noted). It is important to pay
attention that the decks are in step, playing the same beat of each bar (they
aren’t in this example). Mixing tracks that are out of step often ends in tears.
The nudge buttons allow you to skip forward/backward a beat (top) or bar
(bottom), use these buttons to get the decks in phase.
Fine phase - Below the phase LEDs is a bar-display (shown above,
‘Fine–phase’) that grows in the direction of the leading deck (A left, B right).
When the bar disappears (or is small) in the middle, the decks are perfectly
aligned.
BPM, Speed and Pitch
MAGIX Digital DJ 2 has a number of options for changing the speed and pitch
of a deck.