2.0

34 Function Window
Sampler
You can add sound effects and additional loops to your DJ performance using
the sampler. Load samples into one of the 8 integrated sampler slots and play
them back as beat-synchronized loops or individual samples.
Hint: You can load included samples into the MAGIX Digital DJ 2
sampler. In order to be able to edit relooper patterns, you must
upgrade your version to Deckadance Home or Club Edition.
Controls
 LOAD WAV - Loads wave files from disk.
 SAVE WAV - Saves the current sample to disk as a WAV file. Not in MAGIX
Digital DJ 2, requires upgrade.
 < > Arrows right/left – next/previous sample in catalog
 Arrows up/down – sample pitch higher/lower Not in MAGIX Digital DJ 2,
requires upgrade.
 Volume (Vertical Fader) - Controls the output level of the sampler slot.
 Play button - Left-click for momentary playback, right-click for continuous
playback.
 REC. LOOP - Records the current output from the associated deck. The
length of the recorded loop is set by the Loop/Leap (view page 19) length
switche
s on the deck being recorded. Not in MAGIX Digital DJ 2, requires
upgrade.
 BEAT SYNC - Select to play samples on-cue and in time with the current
track (if a beat is detected). The beat phase and playback speed of the
assigned deck (A/B, see below) will be used.
NOTE: The Pitch Up/Down buttons (to the right of the Rec Loop &amp Beat
Sync buttons) won't function if this function is selected.
 A / B - Assigns the sampler to deck A or B.
 (Headphones) - Sends the output to the headphone mix bus.
 Effects (Horizontal Fader) - Left: Low Pass filter. Right: High Pass filter.