2.0

42 Function Window
 PHONE SPLIT - L/R monitoring. When selected, you will hear PFL in your left
headphone and Master in the right one, assuming that your monitor setup is
routed to your headphones and you have them on the correct way around.
Perhaps we assume too much?!
 OVERDRIVE - Colors the monitor signal and boots levels to make it easier to
distinguish from the PA. Watch your ears!
Note: Consider investing in a good set of 'in-ear' monitors, which effectively
reduce the noise from the club PA, allowing you to monitor at levels
significantly lower than normal, sparing your hearing while keeping you on top
of the beat.
MASTER CONTROL
 MASTER LEVEL - Main output levels from the program, usually this is the
feed to the club's PA.
CROSSFADER CONTROL
 CURVATURE SLIDER - Adjusts between a very narrow/quick curve (left),
useful for turntablism/scratching, and a more gradual X fade (right).
 REVERSED - Reverses the crossfader curve, i.e. Deck B is silenced when the
crossfader is set to the right.
 LINEAR MODE - Bypasses the default fade curve and engages a simple
linear fade curve. Most commonly used mode by DJs.
SAMPLER
8-BIT MICROSAMPLER - Record (right click to lock) and Play (right-click to
lock) buttons. A simple inline master sampler with two basic functions: Record
and Trigger. It is possible to record the master output mix (what you hear is
what you sample) and then trigger it later in the mix.
Note: Record time is limited to ~10 seconds. There is a hard disk-recorder
(view page 44) located on the central main display above the Function Window
switches.Not in MAGIX Digital DJ 2, requires upgrade.
Control CD Creator
MAGIX Digital DJ 2 has the ability to generate an ultra-accurate timecode file,
to be burned to CD and used with the Timecode source Deckadance
CONTROL CD (view page 37) option so you can control MAGIX Digital DJ 2
from a
CDJ.