MX

196 Audio effects
www.magix.com
Delay: Here the period of time between the individual echo’s can be
determined; the more you turn the control to the left, the faster the echo’s will
follow each other.
Feedback: Here the number of echo’s can be adjusted. Turned completely to
the left, there is no echo at all; turned completely to the right there are virtually
endless repetitions.
Sound Warper
Distortion
This i
s a distorter, which over-modulates the audio object.
Gain: With these controls you adjust the degree of distortion. ‘Gain’ designates
the prestage to an amplifier.
Cut off: Here you adjust the frequency ranges that are to be distorted.
Volume: Here you can adjust the volume of the distorter. The higher you set
the ‘gain’ control, the louder the distortion when compared to the overall
volume.
Filter
Similar to
an equalizer, the filter controls the volume of certain frequency
ranges. It is however also possible to completely suppress frequencies so that
very impressive distortions are possible.
Frequency: Here you set the frequency that is to be filtered.
Level: Here the filtering intensity is adjusted.
Resonance: Here you set the range (band width) around the frequency which
is to be boosted together with the frequency.
Volume: Here the filter volume can be adjusted separately.