6.0

125
Arrange Window
The MIDI port is set in the flip menu directly below the
channel setting. This menu lists the available MIDI driv-
ers.
Adjusting the sound of a Track: The Prg, Vol and Pan
parameters transmit program changes, volume control-
lers (#7) and pan controllers (#10) respectively.
If there is no check in the respective box the default value
is used. The corresponding value is only transmitted if you
place a check in the box (by clicking it) . If there is already
a check in the box, any value alterations you make are
transmitted immediately.
A program change may be selected on the right via a flip
menu; volume and panning are set using the mouse as a
slider. If you hold down alt, any value can be increased or
decreased by clicking on it and tapping the left or right
mouse button.
To the left of the program number, there is an extra para-
meter which is used for Bank Select. If your sound source
can receive Bank Select messages (check in your synth
manual for format details), you can switch between differ-
ent banks, each containing a maximum of 128 sounds. For
this to work you must tell MAGIX midi studio generation
6 via the Patch Name Editor or via Options > Settings >
Recording Options…, which Bank Select message your in-
strument is expecting.
As many devices cannot receive these messages, you can
deactivate this parameter by making the adjustment
shown to the right.
As many devices cannot receive these messages, you can
deactivate this parameter by making the adjustment
shown to the right.
Recording Program Changes, Volume or Pan controllers:
Any of the types of events that can be transmitted by
checking the right square in the track parameter box can
also be stored when in record mode. For example, in
record-pause mode, you can store program changes at
specific positions in the following way:
– Remove the “x” in the box next to Prg (or Vol, or Pan);
– Click on Pause, then Record;
– Move the Song Position line to the place you want;
– Choose the sound (program) you want (or the volume/
pan setting you want);
– Click on the box next to Prg (or Vol, or Pan). Each
selected event will be sent and recorded.
– Click on Stop to exit Record mode.