6.0

Arrange Window
140
will have to choose the MIDI channel you want to edit via
View > Hyper Draw > Channel….
Editing Edges, Move and Copy with HyperDraw engaged:
You can still move and copy sequences that have Hyper
Draw active, by grabbing them by their top edges in the ti-
tle list.
When Hyper Draw is active, you can still change the start
and length of a sequence, but you have to grab it in the top
name zone instead of the blue Hyper Draw area in order to
move the left or right edge, or (for moving and copying), in
the middle of the name area. Just delete the points by
clicking on them and vreate them anew at the desired po-
sition. If possible, lengthen the sequence before and after
the area in which you want to create controller changes.
If Hyper Draw starts behaving oddly…
Hyper Draw supports Program Change events. These are
not interpolated like Controller events to give smooth
curves; instead, one program number remains set until
the next point.
Controller events will only be displayed if their MIDI
channel matches the one set for Hyper Draw (set by call-
ing up View > Hyper Draw > Channel…).
If you make alterations to a group of events (e.g. volumes)
in another editor (e.g. the Event or Hyper Editor), the Hy-
per Draw display will not update until you have selected or
deselected the relevant sequence.
Altering the Display
For information on the basic window functions, please re-
fer to the section
Window Functions from page 86 on-
wards.
Display Menu
In order to maximize the usable space within the Arrange
window, in the Display menu of the Arrange window you
can switch off the display of both the Transport and the Pa-
rameters.
Object Display
Making Sequence Parameters Visible: Enlarge the dis-
play using the vertical zoom button. If the zoom setting is
large enough, you will be able to see the sequence para-
meters displayed in the bottom half of all the objects. Here
you can directly edit the sequence parameters with the
mouse (by means of sliders and/or flip menus).