6.0

141
Arrange Window
Contents Visible in the Object: If you vertically zoom
the display further, you will be able to see the actual events
contained within the objects.
Sequences show notes and controller events.
Altering the Background of the Arrange: Use the
function View > Grid to switch on/off a track/bar number
grid in the arrange area’s background.
View > White Background toggles the background be-
tween grey/high resolution and white.
Reset Functions
To switch off stuck notes, click on the MIDI monitor in
the Transport window, or hit “STOP” twice in rapid suc-
cession. In both cases, reset messages are sent, as defined
in Options > Settings > Reset Preferences….
For hanging notes—Panic Function: If the notes
continue to sound, then your sound sources may not be
able to respond to “All Notes Off” messages. If this hap-
pens, try the following:
Double-click on the MIDI Monitor in the Transport win-
dow (or use the key command Send discrete Note Offs). Sep-
arate Note Off messages will now be sent for every note on
all channels of every MIDI port. That should do the trick.
Unwanted modulation—Controller Reset: Options
> Send to MIDI > Reset Controllers transmits a control
change message #121 with the value 0 (reset all control-
lers) on all MIDI channels and outputs used by existing
tracks. This neutralizes all sound alteration caused by
MIDI controllers like modulation or pitch wheels.
If some sounds are suddenly too quiet—
Volume Reset: The function Options > Send to MIDI >
Maximum Volume transmits a control change message
#7 (main volume) with a value of 127 on all MIDI channels
and outputs used by existing tracks. This sets all channels
to their maximum volume, giving your sound sources the
optimum signal/noise ratio.
X
X
X