6.0

Mixers and Audio Objects
158
been assigned to the insert, a double-click on its name
opens its parameter box.
Bypassing Inserts: Inserts can be bypassed (switched
off) by clicking on the insert name while holding the strg-
key.
The names of activated effects will be displayed with a
highlighted background, the names of bypassed effects
will have a grey background.
When you click the little box with the triangle, you will see
the options for the plug-ins: Copy Setting, Paste Setting,
Load Setting, Save Setting as…, Save Setting). The func-
tionality is pretty self-explanatory: Copy a setting from one
plug-in to the other (copy/paste), save the setting on the
harddisk for later use, load a previous saved setting, or
save an existing setting under another name to preserve
the actual file.
The settings for a plug-in are stored in a folder named af-
ter the plug-in. All these plug-in-settings folders for the
different plug-ins reside in a folder called Plug-In Set-
tings. The folder Plug-In Settings resides in the folder of
your MAGIX midi studio generation 6 program. Please do
not touch this folder hierarchy—everything is set up cor-
rectly by the installation routine.
Equalizer (EQ)
Three bands of equalization are available per track. For
treble control there is a shelving high frequency filter. For
bass control there is a shelving low frequency filter.The
midrange can be controlled with a semi-parametric sweep
EQ. You can control the amount of treble and bass using
the shelving type knobs (H and L). For the mid band, us-
ing knob “f” you can (in kHz) determine at which fre-
quency you want to increase or decrease the level using
knob M.
All EQ adjustments can be automated. Please read section
Automation from page 178 onwards.
Sends (Aux Sends)
The Sends allow you to send a portion of any signal out of
the signal’s audio object, to an internal effect or auxiliary
output. The Send routing options available vary depend-
ing on the hardware you are using. Sends are always “post
fader”, meaning that the level of the track fader will affect
the amount of signal sent to the aux effect.
Click on an empty Send slot and choose one of the possi-
ble four send destinations, using the flip menu that ap-
pears. When you have chosen the send destination, you
can regulate the amount of signal supplied to the send us-