6.0

281
Song Settings and Preferences
programmers as only then will you be able monitor the
changes to the sound immediately. If you just want to
record SysEx dumps don’t select the checkbox. It hardly
ever makes sense to divert dumps through the computer,
unless you want to record a dump, and simultaneously
transmit it to a second device of the same make.
Transmit MIDI Clock: MAGIX midi studio generation 6
transmits MIDI Clock with Song Position Pointer. For
more about these terms, please see the section Receiving
MIDI Clock/SPP from page 268 onwards. The MIDI out-
put is selected to the right of this option (see the next para-
graph).
Transmit MTC (MIDI Time Code): MIDI Time Code is
transmitted when this is enabled.You may set the MIDI
output port in the input area at the right of this option. Se-
lect the port by click-holding on the box.
Auto Sync In: When this option is activated, MAGIX
midi studio generation 6 runs as Master (sync mode Inter-
nal), until any synchronization signal will be received—ei-
ther MTC or Clock/SPP.
MAGIX midi studio generation 6 synchronizes automati-
cally to the sync signal that will be received first. Please be
sure that you are either; a) only using one external syn-
chronization source or; b) certain that MAGIX midi studio
generation 6 will not receive sync data from more than
one source at a given time.
Chase Events
This page is for making settings relating to the “Chase
Events” function described on page 117. You can reach this
page following the path Options > Settings > Chase
Events…
Message Type Switches: These switches are used to se-
lect the event types for which event chasing applies. The
symbols are the same as the ones in the Event List Editor.
If a button is gray, it means chase events is deactivated for
that event type.
Notes: When this button is switched off, the following
three options are not available.
Chase sustained Notes: This checkbox is used to search
around the current play-start point for any notes which
should still be playing, because of a held-down sustain
pedal.
Chase Notes in ‘No Seq Trp’ Instruments: This means that
even notes are searched, that are played by drum tracks