6.0

302
Quickstart
The first track in your VIP (Virtual Project) is activated for
recording. This is made visible by the red REC button for
the first track.
All tracks within a project can be used for recording.
The first track
1. Click the small box at the top right of the record button
in the transport console, which is activated as a standard.
(Otherwise, you can activate it via the Window menu). You
can now enter various settings in the newly opened dia-
logue “Record Parameter”.
In it you can make several selections as far as your record-
ing settings are concerned. For the time being we are not
concerning ourselves with any settings and leave the de-
fault settings in place.
2. Activate the Monitor button.
This option allows you to preview the audio prior to actu-
ally recording it. Start the audio source to monitor the
strength of the audio signal. You might need to adjust the
volume with either an external mixing console or by using
the sound card’s audio utilities to adjust the input volume.
If the levels are at the desired volume you can move on to
the next step.The LED peakmeters will show you whether
your audio is coming in too loud as well. If you see a ‘Clip’
indicator, please reduce the volume of the audio signal.
3. Restart the audio again and click on the Record button
in the Record Parameter dialog or press ‘R’ on the keyboard.
MAGIX audio studio generation 6 will now start recording
your audio and will indicate the length and progress of the
recording in the Record Time field. During the recording
Small box for the Record
Parameter dialogue
Record