6.0

Menu File
355
SCSI-ID: Lets you set the ID of your CD ROM drive. Be
sure to set the correct ID, there is no error checking!
SCSI-LUN: Select the SCSI LUN parameter, normally 0.
Alias: Lets you select a manufacturers type of your CD ROM
drive.
Copy Mode Normal: Copies the audio data without any
software correction.
Copy Mode Sector Synchronization: Copies the audio
data using a software correction algorithm. This is useful,
because some CD ROM drives cannot seek exactly to the
same position between two read accesses but MAGIX audio
studio can correct these differences using this algorithm.
Copy Mode Burst: Optimizes the speed of the copy process,
no software correction is done.
Sectors per Read: Defines the number of audio sectors
per read cycle, the higher the number the faster the copy
process will be. Not all SCSI adapters support more than
27 sectors!
Sync Sectors: Defines the number of audio sectors used
for the Sector Synchronization. A higher number results
in a better synchronization but also in a slower copy process.
Save Project
The current project is saved with the name displayed in the
project window. If you previously have not specified a name
for your project, MAGIX audio studio will ask you to do so.
Keys: s
Save Project as
You can define the path and name of the new project you
want to save your work under. RAM projects and virtual
projects will be saved with the new names (the source file
remains untouched). HD Wave projects are renamed on
the hard disk. MAGIX audio studio will not generate a copy
of it for reasons of conserving space on your hard drive.
Keys: SHIFT + s