6.0

Menu Edit
366
After inserting the contents, the program selects a range
over the inserted area. If you select Edit->Delete , the in-
serted contents are removed and the project is returned to
the original state.
In virtual projects using selected ranges, the program
utilizes the beginning position and relative track position
as the insert point for the VirtClip or Clip contents.
The following table shows how MAGIX audio studio
responds in the case the clip and the project have different
channel numbers:
Clip Project > Clip Channel >Project Channel
Mono > Mono > Channel 1 Channel 1
Stereo > Stereo > Channel 1 Channel 1
> Channel 2 Channel 2
Mono > Stereo > Channel 1 Channel 1
> Channel 1 Channel 2
Stereo > Mono > Channel 1 Channel 1
Keys: CTRL +v oder v
Overwrite with Clip
The current range is replaced with the Clip contents. The
overall sample length remains unchanged. The data that
occupied this position before cannot be recalled. The Clip
contents are not changed. The assignment of the Clip
channels follows the table mentioned above.
In virtual projects, the selected range determines the
position and track in which the Clip is inserted.
Shortcut:
Keys: Alt +v or Insert Key
Extract
This function is the counter part of the ‘Cut’ function.
Wave Projects:
The current range remains unchanged only the sections
before and after the selected range are permanently
deleted. The audio file becomes shorter. The contents of
the Clip are unchanged.
Virtual Projects (VIP):
The selected range determines the material from all VIP
tracks that remains in the project after using the function
no matter whether the selected range spans all tracks or
not. This means that this function does not operate track