6.0

Menu Edit
367
selectively. The objects before and after the selected range
are deleted from the project. The contents of the VirtClip
remain unchanged.
The virtual project is expanded by one empty track.
Mix with Clip
The range contents and the Clip contents are mixed.
Channel assignment between project and Clip follows the
table above (See “Insert” function). The contents of the Clip
are not altered.
Since either component is combined with their full sample
values, make sure that no over-modulation takes place. This
function is performed by way of addition. This assures on
one hand, that the project sample remains free of a sudden
volume decrease. On the other hand, modification of the
amplitude might need to be performed before the mix to
keep the resulting sample from clipping and distorting. For
information on amplitude modification, see “Editing Menu”.
Insert Workspace
The “Insert Workspace” option will insert “blank” data at
the current play cursor position or the position of the
currently selected range. Size and position of the inserted
blank space will depend on the length of the range selected
before.
The blank space will actually contain data with zero value.
The data following the insertion point will be added to the
end of the blank space. The defined range is maintained,
the length of the inserted space extends the overall sample.
If you do not have sufficient memory to insert the workspace
(i.e. with RAM projects), MAGIX audio studio will display
an error message.
Add one Track
This option adds a new empty track. The maximum number
of tracks is 24 (deLuxe: 48).
Crossfade Editor
Wave Projects (RAM or HD):
The section before the current play cursor position or the
selected range is merged with the contents of the Clip in a
way to create a crossfade section. Two separate cuts are
needed:
1) Copy a range into the Clip.
2) Set the play cursor on the desired position and then call
up the crossfading function.