6.0

373
Menu View
ton “Get Range”). This option is very useful if you have
found the perfect location defining a particular music bar
in the sample. To transfer the range into the grid, use the
command “Get Range”.
Bar Snap: Activates a grid, this is based on bars and beats.
You can specify the speed of the measure by entering the
BPM (Beats Per Measure) value in the dialog box. By
clicking on the “Bar Definitions” button you have more
options to specify the parameters for this option such as
the time signature.
If a complete 4/4 measure is selected the number of beats
in the measure would be 4. The length of the range would
determine the speed in BPM that is needed to play the
sample in the selected time frame.
Bar Definitions: This dialog lets you specify the bar
settings, e.g. Numerator / Denominator, the speed in beats
per minute and the timer resolution in peaks per quarter
note.
Keys: SHIFT + r
Key for switching the two modes: Tab
VIP Display Mode
The Display Preferences were designed to help you define
the two alternative display modes possible in MAGIX audio
studio when working with virtual projects.
Usually you choose mode 1 for detailed drawing of samples
with all information displayed and mode 2 for a quick
drawing without graphics. Switching between the two
modes is possible by pressing the Tab-key.
The menu option will provide you with another window in
which you can specify the details of the two different display
modes.
Definition
This will allow you to set the following configuration options
for the VIP display. Settings can be made for the to display
modes.