6.0

378
Menu Object
Contrary to the menu Edit all functions in this menu exclu-
sively manipulate selected objects in virtual projects. Se-
lected ranges have no effect with these functions. Ranges
are used to determine insertion points or cut positions of
objects. When inserting material into a virtual project, the
range beginning has the same function as the play cursor
– the material is inserted at the range beginning.
New Object
Use this function to create a virtual object. The current range
in the Wave project will be inserted into the virtual project
at the play cursor position. It will also be the currently se-
lected object. This is the same procedure as the drag&drop
method explained earlier in this chapter.
The object is inserted at the actual range position in the
VIP.
Mute objects
The selected objects will be muted.
Cutting Objects > Cut Objects
The currently selected object is replaced with empty space
and copied to the VirtClip. The length of the current project
remains and all other non-selected objects remain in their
positions. The previous contents of the VirtClip are replaced
with the cut object.
If a range is selected, all active objects are separated on the
range edges.
Cutting Objects > Copy Objects
To place a copy of the currently selected object into the
VirtClip select this option. The contents of the VirtClip can
then be inserted into the project using the “Insert Objects”
option (see below). The previous contents of the VirtClip
are replaced.
Cutting Objects > Insert Objects
Objects in the VirtClip can be inserted in the project at the
current play cursor position. The other objects in the project
maintain their positions. Please note that the newly inserted
object might cover portions of the already existing objects.
Simply drag the new object to a different set of tracks or
reposition the object on the same tracks.