6.0

Menu Range
405
Edit Range > Flip Range left
The current range is shifted left by the length of the range.
Its end will be its former beginning. If there is not enough
room to place the range, the command will not be executed.
Keys: CTRL + SHIFT + left
Edit Range > Flip Range right
The current range is shifted right by the length of the range.
Its beginning will be its former end. Keep in mind that if
there is not enough room to place the range, the command
will not be executed.
Keys: CTRL + SHIFT +right
Edit Range > Beginning of Range > 0
This function shifts the beginning of range to the right of
the next zero position. The function can be called from the
keyboard by pressing the left Shift + Alt keys and “6” on
the numeric keypad at the same time. You can also press
the PgUp key.
Keys: Page Up
Edit Range > End of Range > 0
This function shifts the end of the range to the right of the
next zero position (change in polarity). “Zero position” is
the next sample value with zero value or the boundary
between a positive and a negative sample value (or vice
versa). This is particular useful for searching for loop points.
The function can be called from the keyboard by pressing
the right Shift + Alt keys and “6” on the numeric keypad or
the PgDn keys.
Keys: Page Down
Edit Range > Beginning of Range < 0
This function shifts the beginning of the range to the left
of the next zero position. The function can be called from
the keyboard by pressing of the left Shift + Alt keys and “4”
on the numeric keypad. You can also press the PgDn key.
Keys: SHIFT + Page Up
Edit Range > End of Range < 0
This function shifts the end of the range to the left of the
next zero position.