6.0

Menu Range
406
The function can be called from the keyboard by simul-
taneously pressing the right Shift + Alt keys and “4” on the
numeric keypad or by pressing the Shift + PgDn keys.
Keys: SHIFT + Page Down
Edit Range > 0> Range < 0
This function shifts the beginning of the range to the left
and the end of the range to the right of the next zero position.
Keys: Clear
Range length to
This command lets you set the range length to 1, 2, 4, 8,
and 16 bars. You can set the tempo in BPM with menu
View->Snap Setup.
Split Range
This function is in particular useful for working with loops.
If not already displaying in Split Range Mode the project is
first switched to this mode displaying three sections on the
screen.
The upper section displays the whole sample. The section
located at the bottom left displays the data near the
beginning of the range. The section at the bottom right
displays the data near the end of the range.
The boundaries of the range can be exactly positioned in
the lower sections, while the upper section will display the
location of the entire range. You can also define ranges
across several sections.
Keys: b
Split Range for Video
This function is in particular useful for working with AVI
Videos.
The upper section displays the whole sample. The section
located at the bottom left displays the data near the
beginning of the range. The section at the bottom right
displays the data near the end of the range.
Both lower sections are zoomed down to single frame
accuracy.
The boundaries of the range can be exactly positioned in
the lower sections, while the upper section will display the
location of the entire range. You can also define ranges
across several sections.
To undo the split, the display has to be returned to a 1 section
display with Shift + b or View->Sections->1.