6.0

Menu Range
409
Threshold (dB): This is the maximum volume of a ”si-
lent” area. The level of the area in the project will be set on
the level of the threshold in the graphic display!
Starting number: The markers will start to count from
the number you type in this dialogue box.
Prefix: This allows you to insert additional symbols (let-
ters would be appropriate), which will be placed in front of
the marker-numbers. By doing this, you will able to distin-
guish between new and older markers.
Delete marker
The selected marker will be deleted.
Delete all markers
All markers of the project will be deleted.
Recall last range
Get the last selected range. This is useful if you have clicked
Range Editor
The beginning, the end and length of a selected range can
be numerically changed in different units of measurement.
This function will let you specify minute details of a
particular range you need to set.
If you change any of the values in the “Range Start”, “Ran-
ge Length” or “Range End” sections, all other values will
automatically be updated with the exceptions below:
Change values in the Range Start section:
The end will be maintained.
Change values in the Range End section:
The start will be maintained.
Change values in the Range Length section:
The start will be maintained.
Please note the format of the “Bar” dialog box. The format
is displayed as a 4/4 beat with 96 clicks per quarter.
Displayed are the bar, beat, and clicks.
The number of beats per minute (BPM) can be set in the
BPM dialog box in View->Snap Setup.