6.0

Menu CD (deLuxe-version)
415
Set Pause Time
Use this function to set the length of the default pause
between two tracks. These pause length is needed for the
grid function, which lets the sample objects snap to the
edges of other objects + this pause time. Normally a pause
time of 2 seconds is used.
Set Start Pause Time
Use this function to set the length of the default pause
before the first track.
Normally a start pause time of 2 seconds is used.
Special CD Arrange-Mode
If you activate this menu feature, MAGIX audio studio will
arrange the next objects introducing a Red Book-Standard-
Pause between them.
The following procedure highly recommended:
– Open a new VIP, with 4 tracks for example, so that you
may reedit it later on
– Activate the Special CD Arrange Mode in the CD Menu
– Open a new VIP
– Load wave files, audio tracks or make a recording using
the microphone
– You will notice gaps in the VIP between the individual
objects which represent the inserted breaks. You can
adjust the length of the included pauses in the dialogue
”Adjust Pause Length” if you want.
Bouncing (Internal Mixdown)
Use this function to convert the objects within a selected
range to a new WAV file. The selected objects in the VIP
are replaced with the track-bounced version. This is very
useful to combine multiple objects into a single object so
that the function to create track markers automatically can
be used.