6.0

Menu Options
438
log instruments need time to reach the correct speed. In
order to have MAGIX audio studio link up to the proper
time values, a certain pre-roll frame count can be specified.
Sync Velocity: You can specify how fast MAGIX audio
studio follows a pitch change of the sync master. A value of
100 is good for normal purposes. If you need faster pitch
changes, try 200 or 300. If you want to reduce the pitch
changes in MAGIX audio studio try a setting of 50 or 30!
SMPTE-Offset: The SMPTE offset is indicated in
milliseconds and in SMPTE frames. The offset is removed
from the incoming SMPTE time code signal to line up
differences between tape material and recorded samples in
MAGIX audio studio. With an offset of “60:00:00”
milliseconds (1 hour) a tape that was previously stripped
can be synchronized, if the start point for the recording/
playback starts at 1 hour. MAGIX audio studio will, however,
start at the correct beginning position.
FX: With this parameter, possible inaccuracies during the
positioning of long samples can be equalized. Requirement
is a flawless synchronization at the sample beginning.
Follow the instructions in the chapter “Problem Solutions”.
Shortcut: key g
Program Preferences > Undo Definitions
The depth of undo can be specified when working with
VIP’s. A value of “20” means that the last 20 changes can
be undone.