6.0

Menu Windows
450
If only a single stereo device is installed in the system, the
AUX Sends will not be available.
Master Effects (Mixer)
Master Equalizer
Low: Adjusts low EQ band, right mouse button opens EQ
dialog
Mid: Adjusts medium EQ band, right mouse button opens
EQ dialog
Hi: Adjusts high EQ band, right mouse button opens EQ
dialog
Master FFT Filter
The control knob adjusts the damping of the filtered signal.
The FFT Filter section enables you to make precise Master
EQ adjustments. Simply draw the required frequency res-
ponse into the graphic window of the FFT filter dialog. The
complete FFT Filter section can be bypassed with the button
next to the control knob in the Master section.
Stereo Enhancer
The base width can be changed with the control knob. The
settings range from “0” (Mono) to “200” (variance signal,
the mid-section is removed).
The complete effect can be bypassed with the button next
to the control knob in the Master section.
Master Volume (Mixer)
Volume Faders: Adjusts the master volume.
Norm: This is the Master Normalization. When the button
is clicked, the volume faders are adjusted in a way, so that
the loudest sections in the signal represent 0 dB.
Requirement for this function is the locating of the loudest
section in the VIP and playing it back. The maximum level
is displayed during the playback. While clicking on the
Norm button, the program adjusts the master level in a
way to reference the signal at that exact location to 0 dB. To
display the maximum values after other changes in the
effects are made, use the Peak Reset button to clear the
peak meters.
DirX: This allows you to insert DirectX Plug-Ins into the
signal chain. (More about it below).
Link: Links the master section faders to a stereo fader.