15.0

Parametric equalizer (mixer channels, mix
master)
This dialog contains a 4-band parametric equalizer. You can adjust the sound of your sample by
activating filters on three independent frequency bands. This allows you to raise the bass and treble in a
broad spectrum as well as make very specific corrections in the dynamic frequency spectrum.
However, you will first have to highlight an area of the current project or the entire project with "A"
(wave projects).
Don't forget that the mixer ("M") also includes one equalizer per channel which works in real time and
does not modify the saved audio material (non-destructive manipulation process).
Frequency
: Adjust the middle frequencies of the different filters between 10 Hz and 24 kHz using these switches.
As your choice is completely unrestricted, you can also set various filters to the same frequencies in order
to obtain more pronounced effects.
Q
: Here you can set the frequency-spectrum of each filter between 10 Hz and 10 kHz.
Gain
: These switches control the activity and intensity of each filter. If the switch is set to 0, the filter will be
inactivated, saving system resources.
Volume
: This button controls the general volume should the filters produce an extreme increase or decrease of
the individual levels.
Setup A/B/C:
Here you can switch between three various setups so that an acoustic comparison between the various
settings can be performed, for example, during the preview function (Play/Stop button).
Page 167